DIY Colored Appliances Using Vinyl Car Wrap

I really wanted to match our old white dishwasher to our cabinet color that I used in my green and white two-toned kitchen makeover.

Matching the color was a bit tricky but luckily I painted our cabinets myself so I could work with the color code. If you don't know yours you could contact the manufacturer.

– sheet of car vinyl wrap  – sharp crafting knife – 70% alcohol and lint-free  wipes – professional-grade tack clothes – lint-free gloves  – felt squeegee tool for vinyl applications, i – screwdrivers – a blow dryer or heat gun – appliance owners manuals

Materials and Tools needed:

Clean the removed panels thoroughly, like painstakingly clean by using the alcohol on lint-free wipes followed by the tack cloths to remove any dirt and dust specs because they would show up.

1

This vinyl needs heat from a blow dryer or heat gun.

2

I started on one side of the dishwasher panel that wasn’t as visible as the left and right side.

3

I used the felt squeegee to remove all wrinkles and bubbles while pulling the backing off from behind.

4

Heat is required to activate the adhesive and to make the vinyl stretchable and moldable. You can pull if off again and again.

5

Make sure you go over the entire front panel with heat again to make sure the adhesive is activated.

6

I used a bit of metal primer to prime the screws and then some of my cabinet paint to cover the screws and make them blend in with the color.

7

Swipe Up For The Full Tutorial!